Guide to Beer Keg Taps

Whenever family and friends have a party or go out for a picnic, they usually have beer kegs available. People who are thirsty drink a lot and so it is very cost effective to have a keg in the available since it also saves you a lot of money. The device that allows you to release the beer into your drinking cup from the keg is a keg tap. It is easy to use a keg tap but you must be careful not to waste beer if you are not sure how to do it correctly. Improper use of the keg tap can let foam go all over your face or all over you. You would see people doing this but it is not as easy as it looks.

In order to get beer from the keg, you need to control the keg tap. You can release beer from the keg tap with the use of a lever and through pulling and pressing it. It works by releasing the pressure, which in turn pushes the beer up and into a glass or a container. The keg tap is technically a switch and may be an on-off or a close-open switch.

You can minimize the foam created when pouring by placing the beer keg in a steady position for a short while. When there is too much movement while transporting the keg, the foam builds up. When you have placed the keg where you plan to serve beer, let it stay for a while, because this will help to minimize the foam. Remove the cap or seal since it will be harder to tap with it. Pros don’t remove the cap or seal because they know how not to put the beer at risk. You need to play it safe.

Tapping with CO2 is done with portable keg systems. Party pump is when pressure is receive by the keg in a single unit pump and tap combination. The beer keg tap is separated from the keg. You need to attach the pump, and the faucet must be opened to release the pressure in the keg. Air pressure is applied to the keg by pumping and when the lever is pushed, which is the tap handle, beer is released.

A portable beer keg or a pony keg should be finished in a single because after that the beer loses its flavor when it is mixed with air. An on and off valve is used in a traditional keg. By using this, you are serving by gravity, and there is no air pressure needed. The traditional keg valve simply needs to be opened or closed to get your beer.

Comments are closed.

car & driver